211 lines
6.5 KiB
C++
Raw Normal View History

/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define LOG_TAG "OpenGLRenderer"
Pack preloaded framework assets in a texture atlas When the Android runtime starts, the system preloads a series of assets in the Zygote process. These assets are shared across all processes. Unfortunately, each one of these assets is later uploaded in its own OpenGL texture, once per process. This wastes memory and generates unnecessary OpenGL state changes. This CL introduces an asset server that provides an atlas to all processes. Note: bitmaps used by skia shaders are *not* sampled from the atlas. It's an uncommon use case and would require extra texture transforms in the GL shaders. WHAT IS THE ASSETS ATLAS The "assets atlas" is a single, shareable graphic buffer that contains all the system's preloaded bitmap drawables (this includes 9-patches.) The atlas is made of two distinct objects: the graphic buffer that contains the actual pixels and the map which indicates where each preloaded bitmap can be found in the atlas (essentially a pair of x and y coordinates.) HOW IS THE ASSETS ATLAS GENERATED Because we need to support a wide variety of devices and because it is easy to change the list of preloaded drawables, the atlas is generated at runtime, during the startup phase of the system process. There are several steps that lead to the atlas generation: 1. If the device is booting for the first time, or if the device was updated, we need to find the best atlas configuration. To do so, the atlas service tries a number of width, height and algorithm variations that allows us to pack as many assets as possible while using as little memory as possible. Once a best configuration is found, it gets written to disk in /data/system/framework_atlas 2. Given a best configuration (algorithm variant, dimensions and number of bitmaps that can be packed in the atlas), the atlas service packs all the preloaded bitmaps into a single graphic buffer object. 3. The packing is done using Skia in a temporary native bitmap. The Skia bitmap is then copied into the graphic buffer using OpenGL ES to benefit from texture swizzling. HOW PROCESSES USE THE ATLAS Whenever a process' hardware renderer initializes its EGL context, it queries the atlas service for the graphic buffer and the map. It is important to remember that both the context and the map will be valid for the lifetime of the hardware renderer (if the system process goes down, all apps get killed as well.) Every time the hardware renderer needs to render a bitmap, it first checks whether the bitmap can be found in the assets atlas. When the bitmap is part of the atlas, texture coordinates are remapped appropriately before rendering. Change-Id: I8eaecf53e7f6a33d90da3d0047c5ceec89ea3af0
2013-04-17 18:54:38 -07:00
#define ATRACE_TAG ATRACE_TAG_VIEW
#include <utils/Trace.h>
#include "Program.h"
#include "Vertex.h"
namespace android {
namespace uirenderer {
///////////////////////////////////////////////////////////////////////////////
// Base program
///////////////////////////////////////////////////////////////////////////////
Program::Program(const ProgramDescription& description, const char* vertex, const char* fragment) {
mInitialized = false;
mHasColorUniform = false;
mHasSampler = false;
mUse = false;
// No need to cache compiled shaders, rely instead on Android's
// persistent shaders cache
mVertexShader = buildShader(vertex, GL_VERTEX_SHADER);
if (mVertexShader) {
mFragmentShader = buildShader(fragment, GL_FRAGMENT_SHADER);
if (mFragmentShader) {
mProgramId = glCreateProgram();
glAttachShader(mProgramId, mVertexShader);
glAttachShader(mProgramId, mFragmentShader);
position = bindAttrib("position", kBindingPosition);
if (description.hasTexture || description.hasExternalTexture) {
texCoords = bindAttrib("texCoords", kBindingTexCoords);
} else {
texCoords = -1;
}
Pack preloaded framework assets in a texture atlas When the Android runtime starts, the system preloads a series of assets in the Zygote process. These assets are shared across all processes. Unfortunately, each one of these assets is later uploaded in its own OpenGL texture, once per process. This wastes memory and generates unnecessary OpenGL state changes. This CL introduces an asset server that provides an atlas to all processes. Note: bitmaps used by skia shaders are *not* sampled from the atlas. It's an uncommon use case and would require extra texture transforms in the GL shaders. WHAT IS THE ASSETS ATLAS The "assets atlas" is a single, shareable graphic buffer that contains all the system's preloaded bitmap drawables (this includes 9-patches.) The atlas is made of two distinct objects: the graphic buffer that contains the actual pixels and the map which indicates where each preloaded bitmap can be found in the atlas (essentially a pair of x and y coordinates.) HOW IS THE ASSETS ATLAS GENERATED Because we need to support a wide variety of devices and because it is easy to change the list of preloaded drawables, the atlas is generated at runtime, during the startup phase of the system process. There are several steps that lead to the atlas generation: 1. If the device is booting for the first time, or if the device was updated, we need to find the best atlas configuration. To do so, the atlas service tries a number of width, height and algorithm variations that allows us to pack as many assets as possible while using as little memory as possible. Once a best configuration is found, it gets written to disk in /data/system/framework_atlas 2. Given a best configuration (algorithm variant, dimensions and number of bitmaps that can be packed in the atlas), the atlas service packs all the preloaded bitmaps into a single graphic buffer object. 3. The packing is done using Skia in a temporary native bitmap. The Skia bitmap is then copied into the graphic buffer using OpenGL ES to benefit from texture swizzling. HOW PROCESSES USE THE ATLAS Whenever a process' hardware renderer initializes its EGL context, it queries the atlas service for the graphic buffer and the map. It is important to remember that both the context and the map will be valid for the lifetime of the hardware renderer (if the system process goes down, all apps get killed as well.) Every time the hardware renderer needs to render a bitmap, it first checks whether the bitmap can be found in the assets atlas. When the bitmap is part of the atlas, texture coordinates are remapped appropriately before rendering. Change-Id: I8eaecf53e7f6a33d90da3d0047c5ceec89ea3af0
2013-04-17 18:54:38 -07:00
ATRACE_BEGIN("linkProgram");
glLinkProgram(mProgramId);
Pack preloaded framework assets in a texture atlas When the Android runtime starts, the system preloads a series of assets in the Zygote process. These assets are shared across all processes. Unfortunately, each one of these assets is later uploaded in its own OpenGL texture, once per process. This wastes memory and generates unnecessary OpenGL state changes. This CL introduces an asset server that provides an atlas to all processes. Note: bitmaps used by skia shaders are *not* sampled from the atlas. It's an uncommon use case and would require extra texture transforms in the GL shaders. WHAT IS THE ASSETS ATLAS The "assets atlas" is a single, shareable graphic buffer that contains all the system's preloaded bitmap drawables (this includes 9-patches.) The atlas is made of two distinct objects: the graphic buffer that contains the actual pixels and the map which indicates where each preloaded bitmap can be found in the atlas (essentially a pair of x and y coordinates.) HOW IS THE ASSETS ATLAS GENERATED Because we need to support a wide variety of devices and because it is easy to change the list of preloaded drawables, the atlas is generated at runtime, during the startup phase of the system process. There are several steps that lead to the atlas generation: 1. If the device is booting for the first time, or if the device was updated, we need to find the best atlas configuration. To do so, the atlas service tries a number of width, height and algorithm variations that allows us to pack as many assets as possible while using as little memory as possible. Once a best configuration is found, it gets written to disk in /data/system/framework_atlas 2. Given a best configuration (algorithm variant, dimensions and number of bitmaps that can be packed in the atlas), the atlas service packs all the preloaded bitmaps into a single graphic buffer object. 3. The packing is done using Skia in a temporary native bitmap. The Skia bitmap is then copied into the graphic buffer using OpenGL ES to benefit from texture swizzling. HOW PROCESSES USE THE ATLAS Whenever a process' hardware renderer initializes its EGL context, it queries the atlas service for the graphic buffer and the map. It is important to remember that both the context and the map will be valid for the lifetime of the hardware renderer (if the system process goes down, all apps get killed as well.) Every time the hardware renderer needs to render a bitmap, it first checks whether the bitmap can be found in the assets atlas. When the bitmap is part of the atlas, texture coordinates are remapped appropriately before rendering. Change-Id: I8eaecf53e7f6a33d90da3d0047c5ceec89ea3af0
2013-04-17 18:54:38 -07:00
ATRACE_END();
GLint status;
glGetProgramiv(mProgramId, GL_LINK_STATUS, &status);
if (status != GL_TRUE) {
ALOGE("Error while linking shaders:");
GLint infoLen = 0;
glGetProgramiv(mProgramId, GL_INFO_LOG_LENGTH, &infoLen);
if (infoLen > 1) {
GLchar log[infoLen];
glGetProgramInfoLog(mProgramId, infoLen, 0, &log[0]);
ALOGE("%s", log);
}
glDetachShader(mProgramId, mVertexShader);
glDetachShader(mProgramId, mFragmentShader);
glDeleteShader(mVertexShader);
glDeleteShader(mFragmentShader);
glDeleteProgram(mProgramId);
} else {
mInitialized = true;
}
} else {
glDeleteShader(mVertexShader);
}
}
if (mInitialized) {
transform = addUniform("transform");
projection = addUniform("projection");
}
}
Program::~Program() {
if (mInitialized) {
Pack preloaded framework assets in a texture atlas When the Android runtime starts, the system preloads a series of assets in the Zygote process. These assets are shared across all processes. Unfortunately, each one of these assets is later uploaded in its own OpenGL texture, once per process. This wastes memory and generates unnecessary OpenGL state changes. This CL introduces an asset server that provides an atlas to all processes. Note: bitmaps used by skia shaders are *not* sampled from the atlas. It's an uncommon use case and would require extra texture transforms in the GL shaders. WHAT IS THE ASSETS ATLAS The "assets atlas" is a single, shareable graphic buffer that contains all the system's preloaded bitmap drawables (this includes 9-patches.) The atlas is made of two distinct objects: the graphic buffer that contains the actual pixels and the map which indicates where each preloaded bitmap can be found in the atlas (essentially a pair of x and y coordinates.) HOW IS THE ASSETS ATLAS GENERATED Because we need to support a wide variety of devices and because it is easy to change the list of preloaded drawables, the atlas is generated at runtime, during the startup phase of the system process. There are several steps that lead to the atlas generation: 1. If the device is booting for the first time, or if the device was updated, we need to find the best atlas configuration. To do so, the atlas service tries a number of width, height and algorithm variations that allows us to pack as many assets as possible while using as little memory as possible. Once a best configuration is found, it gets written to disk in /data/system/framework_atlas 2. Given a best configuration (algorithm variant, dimensions and number of bitmaps that can be packed in the atlas), the atlas service packs all the preloaded bitmaps into a single graphic buffer object. 3. The packing is done using Skia in a temporary native bitmap. The Skia bitmap is then copied into the graphic buffer using OpenGL ES to benefit from texture swizzling. HOW PROCESSES USE THE ATLAS Whenever a process' hardware renderer initializes its EGL context, it queries the atlas service for the graphic buffer and the map. It is important to remember that both the context and the map will be valid for the lifetime of the hardware renderer (if the system process goes down, all apps get killed as well.) Every time the hardware renderer needs to render a bitmap, it first checks whether the bitmap can be found in the assets atlas. When the bitmap is part of the atlas, texture coordinates are remapped appropriately before rendering. Change-Id: I8eaecf53e7f6a33d90da3d0047c5ceec89ea3af0
2013-04-17 18:54:38 -07:00
// This would ideally happen after linking the program
// but Tegra drivers, especially when perfhud is enabled,
// sometimes crash if we do so
glDetachShader(mProgramId, mVertexShader);
glDetachShader(mProgramId, mFragmentShader);
glDeleteShader(mVertexShader);
glDeleteShader(mFragmentShader);
glDeleteProgram(mProgramId);
}
}
int Program::addAttrib(const char* name) {
int slot = glGetAttribLocation(mProgramId, name);
mAttributes.add(name, slot);
return slot;
}
int Program::bindAttrib(const char* name, ShaderBindings bindingSlot) {
glBindAttribLocation(mProgramId, bindingSlot, name);
mAttributes.add(name, bindingSlot);
return bindingSlot;
}
int Program::getAttrib(const char* name) {
ssize_t index = mAttributes.indexOfKey(name);
if (index >= 0) {
return mAttributes.valueAt(index);
}
return addAttrib(name);
}
int Program::addUniform(const char* name) {
int slot = glGetUniformLocation(mProgramId, name);
mUniforms.add(name, slot);
return slot;
}
int Program::getUniform(const char* name) {
ssize_t index = mUniforms.indexOfKey(name);
if (index >= 0) {
return mUniforms.valueAt(index);
}
return addUniform(name);
}
GLuint Program::buildShader(const char* source, GLenum type) {
Pack preloaded framework assets in a texture atlas When the Android runtime starts, the system preloads a series of assets in the Zygote process. These assets are shared across all processes. Unfortunately, each one of these assets is later uploaded in its own OpenGL texture, once per process. This wastes memory and generates unnecessary OpenGL state changes. This CL introduces an asset server that provides an atlas to all processes. Note: bitmaps used by skia shaders are *not* sampled from the atlas. It's an uncommon use case and would require extra texture transforms in the GL shaders. WHAT IS THE ASSETS ATLAS The "assets atlas" is a single, shareable graphic buffer that contains all the system's preloaded bitmap drawables (this includes 9-patches.) The atlas is made of two distinct objects: the graphic buffer that contains the actual pixels and the map which indicates where each preloaded bitmap can be found in the atlas (essentially a pair of x and y coordinates.) HOW IS THE ASSETS ATLAS GENERATED Because we need to support a wide variety of devices and because it is easy to change the list of preloaded drawables, the atlas is generated at runtime, during the startup phase of the system process. There are several steps that lead to the atlas generation: 1. If the device is booting for the first time, or if the device was updated, we need to find the best atlas configuration. To do so, the atlas service tries a number of width, height and algorithm variations that allows us to pack as many assets as possible while using as little memory as possible. Once a best configuration is found, it gets written to disk in /data/system/framework_atlas 2. Given a best configuration (algorithm variant, dimensions and number of bitmaps that can be packed in the atlas), the atlas service packs all the preloaded bitmaps into a single graphic buffer object. 3. The packing is done using Skia in a temporary native bitmap. The Skia bitmap is then copied into the graphic buffer using OpenGL ES to benefit from texture swizzling. HOW PROCESSES USE THE ATLAS Whenever a process' hardware renderer initializes its EGL context, it queries the atlas service for the graphic buffer and the map. It is important to remember that both the context and the map will be valid for the lifetime of the hardware renderer (if the system process goes down, all apps get killed as well.) Every time the hardware renderer needs to render a bitmap, it first checks whether the bitmap can be found in the assets atlas. When the bitmap is part of the atlas, texture coordinates are remapped appropriately before rendering. Change-Id: I8eaecf53e7f6a33d90da3d0047c5ceec89ea3af0
2013-04-17 18:54:38 -07:00
ATRACE_CALL();
GLuint shader = glCreateShader(type);
glShaderSource(shader, 1, &source, 0);
glCompileShader(shader);
GLint status;
glGetShaderiv(shader, GL_COMPILE_STATUS, &status);
if (status != GL_TRUE) {
// Some drivers return wrong values for GL_INFO_LOG_LENGTH
// use a fixed size instead
GLchar log[512];
glGetShaderInfoLog(shader, sizeof(log), 0, &log[0]);
ALOGE("Error while compiling shader: %s", log);
glDeleteShader(shader);
return 0;
}
return shader;
}
void Program::set(const mat4& projectionMatrix, const mat4& modelViewMatrix,
const mat4& transformMatrix, bool offset) {
if (projectionMatrix != mProjection || offset != mOffset) {
Pack preloaded framework assets in a texture atlas When the Android runtime starts, the system preloads a series of assets in the Zygote process. These assets are shared across all processes. Unfortunately, each one of these assets is later uploaded in its own OpenGL texture, once per process. This wastes memory and generates unnecessary OpenGL state changes. This CL introduces an asset server that provides an atlas to all processes. Note: bitmaps used by skia shaders are *not* sampled from the atlas. It's an uncommon use case and would require extra texture transforms in the GL shaders. WHAT IS THE ASSETS ATLAS The "assets atlas" is a single, shareable graphic buffer that contains all the system's preloaded bitmap drawables (this includes 9-patches.) The atlas is made of two distinct objects: the graphic buffer that contains the actual pixels and the map which indicates where each preloaded bitmap can be found in the atlas (essentially a pair of x and y coordinates.) HOW IS THE ASSETS ATLAS GENERATED Because we need to support a wide variety of devices and because it is easy to change the list of preloaded drawables, the atlas is generated at runtime, during the startup phase of the system process. There are several steps that lead to the atlas generation: 1. If the device is booting for the first time, or if the device was updated, we need to find the best atlas configuration. To do so, the atlas service tries a number of width, height and algorithm variations that allows us to pack as many assets as possible while using as little memory as possible. Once a best configuration is found, it gets written to disk in /data/system/framework_atlas 2. Given a best configuration (algorithm variant, dimensions and number of bitmaps that can be packed in the atlas), the atlas service packs all the preloaded bitmaps into a single graphic buffer object. 3. The packing is done using Skia in a temporary native bitmap. The Skia bitmap is then copied into the graphic buffer using OpenGL ES to benefit from texture swizzling. HOW PROCESSES USE THE ATLAS Whenever a process' hardware renderer initializes its EGL context, it queries the atlas service for the graphic buffer and the map. It is important to remember that both the context and the map will be valid for the lifetime of the hardware renderer (if the system process goes down, all apps get killed as well.) Every time the hardware renderer needs to render a bitmap, it first checks whether the bitmap can be found in the assets atlas. When the bitmap is part of the atlas, texture coordinates are remapped appropriately before rendering. Change-Id: I8eaecf53e7f6a33d90da3d0047c5ceec89ea3af0
2013-04-17 18:54:38 -07:00
if (CC_LIKELY(!offset)) {
glUniformMatrix4fv(projection, 1, GL_FALSE, &projectionMatrix.data[0]);
} else {
mat4 p(projectionMatrix);
// offset screenspace xy by an amount that compensates for typical precision
// issues in GPU hardware that tends to paint hor/vert lines in pixels shifted
// up and to the left.
// This offset value is based on an assumption that some hardware may use as
// little as 12.4 precision, so we offset by slightly more than 1/16.
p.translate(Vertex::GeometryFudgeFactor(), Vertex::GeometryFudgeFactor());
Pack preloaded framework assets in a texture atlas When the Android runtime starts, the system preloads a series of assets in the Zygote process. These assets are shared across all processes. Unfortunately, each one of these assets is later uploaded in its own OpenGL texture, once per process. This wastes memory and generates unnecessary OpenGL state changes. This CL introduces an asset server that provides an atlas to all processes. Note: bitmaps used by skia shaders are *not* sampled from the atlas. It's an uncommon use case and would require extra texture transforms in the GL shaders. WHAT IS THE ASSETS ATLAS The "assets atlas" is a single, shareable graphic buffer that contains all the system's preloaded bitmap drawables (this includes 9-patches.) The atlas is made of two distinct objects: the graphic buffer that contains the actual pixels and the map which indicates where each preloaded bitmap can be found in the atlas (essentially a pair of x and y coordinates.) HOW IS THE ASSETS ATLAS GENERATED Because we need to support a wide variety of devices and because it is easy to change the list of preloaded drawables, the atlas is generated at runtime, during the startup phase of the system process. There are several steps that lead to the atlas generation: 1. If the device is booting for the first time, or if the device was updated, we need to find the best atlas configuration. To do so, the atlas service tries a number of width, height and algorithm variations that allows us to pack as many assets as possible while using as little memory as possible. Once a best configuration is found, it gets written to disk in /data/system/framework_atlas 2. Given a best configuration (algorithm variant, dimensions and number of bitmaps that can be packed in the atlas), the atlas service packs all the preloaded bitmaps into a single graphic buffer object. 3. The packing is done using Skia in a temporary native bitmap. The Skia bitmap is then copied into the graphic buffer using OpenGL ES to benefit from texture swizzling. HOW PROCESSES USE THE ATLAS Whenever a process' hardware renderer initializes its EGL context, it queries the atlas service for the graphic buffer and the map. It is important to remember that both the context and the map will be valid for the lifetime of the hardware renderer (if the system process goes down, all apps get killed as well.) Every time the hardware renderer needs to render a bitmap, it first checks whether the bitmap can be found in the assets atlas. When the bitmap is part of the atlas, texture coordinates are remapped appropriately before rendering. Change-Id: I8eaecf53e7f6a33d90da3d0047c5ceec89ea3af0
2013-04-17 18:54:38 -07:00
glUniformMatrix4fv(projection, 1, GL_FALSE, &p.data[0]);
}
mProjection = projectionMatrix;
mOffset = offset;
}
mat4 t(transformMatrix);
t.multiply(modelViewMatrix);
glUniformMatrix4fv(transform, 1, GL_FALSE, &t.data[0]);
}
void Program::setColor(const float r, const float g, const float b, const float a) {
if (!mHasColorUniform) {
mColorUniform = getUniform("color");
mHasColorUniform = true;
}
glUniform4f(mColorUniform, r, g, b, a);
}
void Program::use() {
glUseProgram(mProgramId);
if (texCoords >= 0 && !mHasSampler) {
glUniform1i(getUniform("baseSampler"), 0);
mHasSampler = true;
}
mUse = true;
}
void Program::remove() {
mUse = false;
}
}; // namespace uirenderer
}; // namespace android